BTMBJ - IBM 4019 CARTRIDGE REPLACEMENT TONER
- MSDS: BTMBJ
- Manufacturer: ACCUTONE
- Product Name: IBM 4019 CARTRIDGE REPLACEMENT TONER
- National Stock Number: 6850-00N044510
Product Identification
Product ID:IBM 4019 CARTRIDGE REPLACEMENT TONER
MSDS Date:12/01/1990
FSC:6850
NIIN:00N044510
MSDS Number: BTMBJ
Responsible Party
FORT LAUDERDALE, FL 33309
US
Emergency Phone: 800-237-9509
Info Phone: 800-237-9509
Cage: IO334
Contractor
Telephone: 800-237-9509
Cage: IO334
Ingredients
STYRENE-ACRYLIC COPOLYMER
Fraction By Weight: 85-95%
OSHA PEL N/K
ACGIH TLV: N/K
MAGNETITE; (MAGNETIC OXIDE)
CAS: 1309-38-2
RTECS: OM4800000
OSHA PEL N/K
ACGIH TLV: N/K
BENZOIC ACID, 2-((2-CARBOXYPHENYL)AMINO)-4-CHLORO-,DISODIUM
CAS: 64808-48-6
RTECS: DG4975520
Fraction By Weight: 1-3%
OSHA PEL N/K
ACGIH TLV: N/K
POLYWAX
Fraction By Weight: 4-8%
OSHA PEL N/K
ACGIH TLV: N/K
POST ADDITIVES
Fraction By Weight: 0.5-1.5%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO KNOWN HAZARD WHEN USED AS INTENDED
IN A PRINTING DEVICE. ACUTE: INHAL: GASPING AND COUGHING-DON'T
BREATHE IN TONER. EYE: NO HAZARD. SKIN: NO HAZARD.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE O*2/ARTF
RESP) . EYE: WASH FOR AT LEAST 15 MINUTES. SKIN:WASH WITH COLD
WATER AND SOAP. INGEST: CALL MD .
Fire Fighting
Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICAL EXTINGUISHER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:POSSIBLE CONDITIONS COULD CREATE A DRY
DUST EXPLOSION: AVOID SOURCES OF IGNITION.
Accidental Release
Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERTN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV: 1.25-1.65(H*2O=1).
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Vapor Pres:
Evaporation Rate & Reference:
Percent Volatiles by Volume:
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COMBUSTION WILL PRODUCE CARBON DIOXIDE
AND CARBON MONOXIDE.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL
REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.